Colacryl Solid Grades
| Colacryl® Grade |
Form |
Mw |
Glass Tansition Temp. |
Acid # |
Specific Gravity |
Comments |
| TS1329 |
Spherical Beads |
54,000 |
60°C |
3.8 |
1.13 |
This is a co-polymer of methyl methacrylate and n-butyl methacrylate used in coatings (including concrete), inks and adhesives. The benefits include low viscosity and fast dissolving time. Recommended applications include heat seal lacquers, metal coatings and flexographic inks. |
Colacryl Liquid Grades
| Colacryl® Grade |
Form |
Viscosity |
Solid Content |
Solvent |
| TS1875 |
Clear Viscous Liquid |
15-75 poise |
51 ± 2% |
Acetone |
- This is a self-cross-linking acrylic copolymer designed for high performance solvent resistant adhesive applications. Once dried, a film cast from this product remains permanently tacky.
- Suggested uses: Pressure-sensitive self-adhesive products including high shear double-sided tapes and films which require a high degree of solvent resistance. The adhesive has good solvent resistance and can be used with plastic substrates in automotive applications. A typical cure schedule for this product would be 140 °C/ 3 minutes. Full adhesive properties would be reached in about 48 hours.
| Colacryl® Grade |
Form |
Viscosity |
Solid Content |
Molecular Weight (Mw) |
| TS2109 |
Clear Viscous Liquid |
1,500 mPa.s |
40 ± 1% |
150,000 |
Colacryl® TS2109 is a solution polymerized butyl methacrylate copolymer in butyl acetate solvent, used for a variety of coatings and adhesives applications. The carboxyl content of this resin gives good adhesion to many surfaces.
- Typical Uses: Typical uses include the manufacture of coatings with high UV stability and Conformal Coatings.
- Benefits: Convenient form of supply means less processing time
| Colacryl® Grade |
Form |
Viscosity |
Solid Content (% by weight) |
Molecular Weight (Mw) |
Tg |
Acid Number |
| TS2125 |
Clear Viscous Liquid |
3,000 mPa.s |
40% |
150,000 |
23°C |
1.1 mg KOH/g |
Colacryl® TS2125 is a solution polymerised butyl methacrylate copolymer in toluene solvent, used for a variety of coatings and adhesives applications. The carboxyl content of this resin gives good adhesion to many surfaces.
Dental grades
Colacryl denture base polymers have been designed to offer excellent handling properties and working time without compromising strength and durability. With precisely controlled particle size, our PMMA-based acrylic resins offer superior impact resistance, low residual monomer, outstanding aesthetics and no porosity.
| Resins Category |
Colacryl® Grade |
Average Particle Size |
Residual Peroxide |
Dough Time (minutes) |
Snap Time (minutes) |
Work Time (minutes) |
Mixing Ratio Powder/ Liquid |
Recommended Liquid |
| Dentures |
D80FC |
50-60µ |
0.29 ± 0.04% |
20-30 |
35 max. |
15 min. |
24g/10ml |
Colacryl® TS1547 |
| Dentures |
PD11SG |
55-73µ |
0.33 ± 0.06% |
08-13 |
15 max. |
45 min. |
24g/10ml |
| Dentures |
DP300 |
80-100µ |
0.25 ± 0.10% |
30-45 |
50 max. |
20 min. |
24g/10ml |
- Colacryl® D80FC is our best-selling denture base polymer, featuring fine particle size and high molecular weight. It can be fast or slow cured to create high quality dentures.
- Colacryl® PD11SG is a copolymer which offers faster dough time and longer working time for short curing cycles.
- Colacryl® DP300 features a higher particle size which allows longer doughing and working times.
Properties as indicated are for information only and are not to be taken as guarantee of product specification.
| Resins Category |
Colacryl® Grade |
Average Particle Size |
Residual Peroxide |
Pour Time (minutes) |
Set Time (minutes) |
Mixing Ratio Powder/Liquid |
Recommended Liquid |
| Dentures Repairs |
D1-120 |
32-48µ |
2.50 ± 0.20% |
2-5 |
16-23 |
21g/12ml |
Colacryl® TS1504 |
| Dentures Repairs |
TS2027 |
60-76µ |
1.10 ± 0.20% |
2-3 |
14-20 |
13g/10ml |
| Dentures Repairs |
TS2073 |
40-45µ |
0.35 ± 0.15% |
3-5 |
20-26 |
20g/11ml |
- Colacryl® D1-120 has a long pour time and high residual peroxide for cold cure denture repairs.
- Colacryl® TS2027 produces a high clarity prosthesis, sets after a short curing cycle, and can be used for repairs, relines and additions to existing dentures.
- Colacryl® TS2073 can also be formulated with barbituric acid derivatives and co-catalysts to provide a low-yellowing system.
Properties as indicated are for information only and are not to be taken as guarantee of product specification.
| Resins Category |
Colacryl® Grade |
Average Particle Size |
Residual Peroxide |
Dough Time (minutes) |
Snap Time (minutes) |
Work Time (minutes) |
Mixing Ratio Powder/ Liquid |
Recommended Liquid |
| Tooth Polymers |
D150 |
40-56µ |
0.50 ± 0.10% |
10-20 |
25 max. |
15 min. |
24g/10ml |
Colacryl® TS1503 |
| Tooth Polymers |
TS1890 |
35-55µ |
0.20 max. |
18-30 |
40 max. |
20 min. |
19g/10ml |
| Tooth Polymers |
TS2198 |
30-46µ |
0.26 ± 0.04% |
10-20 |
25 max. |
15 min. |
24g/10ml |
| Tooth Polymers |
TS1672 |
55-75µ |
0.55 ± 0.10% |
n/a |
n/a |
n/a |
salt and pepper technique' |
Colacryl® TS1507 |
| Tooth Polymers |
TS1794/2 |
72-88µ |
0.78 ± 0.18% |
- Colacryl® D150 is our best-selling tooth polymer, offering a combination of fast cure time with outstanding aesthetics and strength.
- Colacryl® TS1890 offers extended dough time with easy mixing properties and low residual peroxide.
- Colacryl® TS2198 has an extra-fine particle size which allows faster absorption.
- Colacryl® TS1672 has been designed specifically for the manufacture of high-quality orthodontic appliances, with excellent slump resistance and liquid absorption.
- Colacryl® TS1794/2 has excellent pigment acceptance, superior clarity, and offers improved pile stability.
Properties as indicated are for information only and are not to be taken as guarantee of product specification.
Speciality applications
| Application |
Colacryl® Grade |
Properties |
Recommended Liquid |
| CAD/CAM |
D150 |
Fine free-flowing bead polymers for easy mixing and short cure cycles |
Colacryl® TS1503 |
| Denture Reline |
TS1364/1 |
For tissue conditioners and temporary cushioning of dentures |
Colacryl® TS2023 |
| Temporary Crown & Bridge |
TS2084 |
For heat-cured restorative crowns |
Colacryl® TS1502 |
| Tooth Additives |
TS1352 |
Cross-linked polymer for increased hardness and stain resistance |
n/a |
| TS1697 |
Please get in touch with our Resins and Specialities team by filling out the enquiry form below.
The information shown on this page(s) is intended as a product guide only; specification and properties of products are subject to change by the manufacturer and no guarantees or warranties are implied or inferred by the information provided here. It is the responsibility of the user to request the most current information and determine the suitability of any product in the user’s application.
*in line with our commitment to Responsible Care®, a pre-delivery safety inspection will generally be required prior to the first bulk delivery of a hazardous liquid.